Unique Connecting A Dimmer Switch To A 3 Way Switch

A ground wire a hot lead wire and two travelers to allow for a connection to another switch or outlet.

Connecting a dimmer switch to a 3 way switch. You will find a red and black wire connected to the switch. Then connect the red wire to the side of the switch with the solitary screw. This 3 way dimmer switch is wired as follows.

Push the new switch back into the electrical box and screw it in place. Step 3 unscrew. First twist the wires together and then screw on the wire nut.

Turn off the power to the circuit. Follow these steps to replace an existing three way switch with a three way dimmer switch. Remove the cover plate from the switch.

However if i turn the dimmer off the other switches will not turn the light on. Here are the manuals for the primary and auxiliary dimmer switches i bought to replace my standard switches. But if you re replacing a three way switch with a three way dimmer label the common wire it ll be labeled on the old switch when you remove the old switch so you can connect it to the common terminal on the dimmer.

As long as the switch is on the other switches in the circuit work and i can dim the lights. See lights and switches although there was none there we have added a red indicator to the black wire. Remove the two screws that secure the switch to the wall box and gently pull the switch out.

Step 1 turn off power. The green ground lead attaches to the switch box ground wire the red and white travelers are attached to the pair of red leads and the black lead is connected to the power or switch leg connected at the fixture s. Step 2 take off the cover.