Favorite Rewire Light Switch

For both romex s in the receptacle box the black wires are wired to the brass terminals the white wires to the silver terminals and the ground copper wires are nutted together and attached with a pigtail to the receptacle itself.

Rewire light switch. Then connect the brown and blue cores of the existing switch drop cable and the black and grey cores of the new linking cable to the pair of terminals. The video covers how to wire a basic 15 amp single pole light switch with 14 2 electrical wire. Next take your phillips head screwdriver or power drill and remove the two screws that hold the light switch onto the junction box.

The white or neutral wire bypasses the switch and goes straight to your lights. Label the terminals on your new. They ll either be labelled common l1 and l2 or l1 l2 and l3.

This type of switch lets you turn the light off or on from more than one place in the room. To do this we use the receptacle as a bridge for the hot and common wires. Wiring a single pole light switch here a single pole switch controls the power to a light fixture.

Put a piece of tape on each wire with a number on it. Turn off the power to the switch at the main circuit breaker or fuse panel. Each two way switch will have three terminals arranged as a single and a pair.

Once those screws are removed take your fingers and grab hold of the tabs on the top and bottom of the switch to pull it out of the junction box. The source hot wire is connected to a switch terminal and the other terminal is connected to the black cable wire. The switch serves to cut the power from reaching the light switch.

This wire is needed to complete the circuit. The source is at the switch and 2 wire cable runs from there to the light. In the tutorial viewers will see the use of.